It is common for a device, instrument or piece of equipment to lose power and for you to assume there is a problem with it. In many cases it will simply be the battery losing charge. Using a multimeter to measure the battery voltage is the quickest and easiest way to establish the charge status of a battery and is certainly the first diagnostic check you should carry out on an item before looking into the possibility of a more significant electrical problem.
Having a reliable battery for a device or instrument is very important, so it is essential that you know how to quickly test the charge, in order that you can be assured of uninterrupted performance and can prevent downtime and wasted resources. This can be done using a digital multimeter, such as the TIS E227 supplied by Test Instrument Solutions, which provides fast, accurate results and ensures you have a reliable device, instrument or piece of equipment for your testing purposes.
Safety preparations for testing your battery
It is important to thoroughly inspect the battery before carrying out any tests. Battery terminals can corrode or become loose, and you should be wary of signs of gas or acid leakage around lead-acid batteries. An inspection should also take in the general condition of the battery and any signs of cracks or dents.
Checks before testing your battery
You should check the battery type and voltage rating, which is usually printed on the battery itself. You should also note the battery’s capacity.
Setting up the multimeter
- Select the correct voltage mode on the multimeter, for most batteries this will be DC.
- Select a range that is higher than the voltage of the battery, for example, if it is a 1.5volt battery, set the range to a minimum of 2volts. Some multimeters may be auto-ranging, and so you wouldn’t have to manually select this.
- Connect the red lead on the multimeter to the positive terminal on the battery and the black lead to the negative terminal.
Testing a battery with a digital multimeter
- The digital display on the multimeter should be giving you a voltage reading.
- Wait a moment for the reading to stabilise, then take a record of it.
- You can now compare the voltage reading with the rated voltage of the battery. If the reading is quite low, this suggests the battery is weak and losing charge and needs recharging or replacing.
A lower-than-expected voltage reading is usually a sign that the battery is losing charge, but this could indicate a battery failure whereby simply recharging it won’t solve the problem. This therefore requires further diagnostic work. Another issue is that the battery could have been undercharged or overcharged, which can also provide misleading or confusing results.
So it is important to regularly check battery charge with a multimeter, because it is an early detection method which can prevent failure or damage occurring. It can also differentiate between a charge issue and a deeper problem with the battery. This can prevent safety problems and can also save you costs on battery replacement when a simple recharge or cleaning/maintenance of the terminals on the battery will solve the problem.
You can check out the range of multimeters supplied by Test Instrument Solutions here.
Please note that this section is for information purposes only. Anyone using equipment referred to in this section must be suitably qualified and/or experienced within the respective field. If in doubt before use, please consult a qualified electrician or engineer & thoroughly read all instruction booklets.