⚲
CLOSE SEARCH X
01274 752407 A comprehensive range of quality electrical testing equipment
SEARCHCONTACT
HOME/Our Products/Voltage Testers and Safe Isolation Kits/ TIS 8000SIKIT Open Jaw Voltage Tester Complete Safe Isolation Kit

TIS 8000SIKIT Open Jaw Voltage Tester Complete Safe Isolation Kit

0 Review(s)   (Review this item)
Open Jaw Multitester Complete Safe Isolation Kit
SKU CODE : TIS 8000 SIKIT

Open Jaw Voltage Tester that complies with BSEN 61243-3 and can be used for safe isolation all wrapped up in one complete safe isolation kit.

TIS 8000 :

LED & LCD Measurement 
 Voltage Measurement 1000V AC, 1500V DC
 Current Measurement 200A AC
 Replaceable Leads (See TIS 8000L)
 Can Be Used For Safe Isolation With Appropriate Proving Unit In Accordance With IEC    61243-3:2014
 GS38 Compliant 
 Phase Rotation 
 Non Contact Voltage Detector 
 Resistance Measurement 
 Continuity Test 
 Diode Test
 Frequency Measurement 
 Torch Light 
 Self Test (Voltage & Continuity)
 Duty Cycle 
 Low Battery Warning 
 Auto Power Off
 Fork Opening 14mm
 IP64 Protection 
 Complaince IEC 61243-3:2014, IEC 61010-1:2010
 CAT IV 600V, CAT III 1000V
 Power Supply 2x 1.5V AAA
 ACV (1V – 29.9V) 3% +/- 1.0V 
 
 ACV (30V–1000V) 1.5% +/- 3V
 
 DCV (1V – 29.9V) 3% +/- 1.0V
 DCV (30V–1000V) 1.5% +/- 3V
 
 Resistance Measurements: 
 (1Ω - 100kΩ) 3% +/- 5 digits
 
 AC Current Measurements 
 (0.1A – 24.9A) 3% +/- 3 digits
 (25A-200A) 3% +/- 3 digits 
 
TIS PU1:
 
SPECIFICATION
• Voltage: Up to 690V AC
• Batteries: 6 x AA Alkaline Batteries
• Low Battery warning by LED indication
• Auto Power On & Auto Power Off
• Meets HSE GS 38 Regulations

Although designed for use with TIS 859, TIS 849, TIS 851 and TIS 819 the TIS PU1 is compatible with any make of 2 pole voltage and continuity tester

GENERAL
Dimensions (Approximate) 110mm x 50mm x 45mm
Power: 6 x AA Alkaline Batteries (Supplied)

EAN Barcode 5060508210023
 
TIS BKIT:
 
GENERAL FEATURES

Kit Contents
Lockout Pouch
Lockout Hasp
Lockout Padlock
Pin Out MCB Lockout
Pin In MCB Lockout
MCB Lockout-Red
Writing Pen for Tags
Lockout Tags
2 Year warranty
EAN Barcode: 5060508210429
 
TIS PUK:

Ideal for use with a voltage tester and proving unit

•  Dimensions 280mm x 80mm x 40mm

•  The case includes a removable shoulder strap

 
 
DescriptionSizeFormatGet File
TIS 8000 Instruction Manual 891336.pdfDOWNLOAD
TIS PU1 Instruction Manual 455057.pdfDOWNLOAD
ASSOCIATED PRODUCTS
TIS 849SIKIT Elite Voltage and Continuity Complete Safe Isolation Kit

TIS 849SIKIT Elite Voltage and Continuity Complete Safe Isolation Kit

 TIS 819SIKIT Voltage Only Complete Safe Isolation Kit

TIS 819SIKIT Voltage Only Complete Safe Isolation Kit

 TIS 851SIKIT Voltage and Continuity Complete Safe Isolation Kit

TIS 851SIKIT Voltage and Continuity Complete Safe Isolation Kit

 TIS 850SIKIT Voltage & Continuity Complete Safe Isolation Kit

TIS 850SIKIT Voltage & Continuity Complete Safe Isolation Kit

TIS 859SIKIT Elite Voltage and Continuity Complete Safe Isolation Kit

TIS 859SIKIT Elite Voltage and Continuity Complete Safe Isolation Kit
“
Excellent customer service! I contacted them because one of my testers had developed a fault, and was out of warranty. Once the fault was explained and looked into TIS agreed to replace the tester free of charge, via my local electrical wholesaler. All done and dusted in less than a week - fantastic!
”
James Sealey
Privacy Accessibility Site Map
©2024 Test Instrument Solutions Limited, all rights reserved. Site by Edoru