CLOSE SEARCH X
01274 752407 A comprehensive range of quality electrical testing equipment
HOME/Our Products/Solar PV Test Equipment/ TIS PV1 Solar Irradiance Meter

TIS PV1 Solar Irradiance Meter

0 Review(s)   (Review this item)
SKU CODE : TIS PV1

The TIS PV1 Solar Power Meter is used to measure Solar Power. With this unit you can measure the optimal incident angle for Solar Panels & determine the best choice of Solar Panel. Measurements are displayed in W/M squared or BTU.

BASIC FUNCTIONS

•  Range 1999W/m² or 634 BTU/(ft2 x h)² Accuracy Typically within ±10W/m2 [±3BTU / (ft2 x h) or ±5%
•  Additional Temp. induced error ±0.38W/m2/°C (±0.12BTU / (ft2 x h)°C from 25°C
•  Operating Temp. & Relative Humidity 5°C ~ 40°C, below 80% RH
•  Resolution 0.1W/m2 or 0.1BTU / (ft2 x h)

SPECIAL FUNCTIONS
•  Optimal Incident Angle for Solar Panels
•  Solar Radiation Measurement
•  Transmission Measurement for measuring the effectiveness of Solar Film
•  Car Window Light Intensity Measurement
•  Measurement of the Sun’s Transmission through Transparent and Film Glass
•  Easy to use and the Information is Displayed Automatically
•  Complete with Carry Case
•  Measures up to 1999W/m2 or 634 BTU
•  Overload Display
•  Selectable Range W/m2 ot BTU (ft2 x h) units 1
•  Stable Readings
•  Data Hold
•  Zero Display
•  Low Battery Warning (Battery Life: approx. 50 hr)
•  Auto Range
•  3 ¾ LCD Display

GENERAL SPECIFICATIONS
Power 2 x 1.5V AAA MN2400
Weight 90g
Size 134mm x 48mm x 27mm
Standard Accessories User Manual & Carrying Case

DescriptionSizeFormatGet File
TIS PV1 Instruction Manual 839989.pdfDOWNLOAD
ASSOCIATED PRODUCTS
TIS E247 Elite TRMS AC/DC Digital Clampmeter with Amp Tip Jaws

TIS E247 Elite TRMS AC/DC Digital Clampmeter with Amp Tip Jaws

TIS E257 Elite TRMS AC/DC Digital Clampmeter with Amp Tip Jaws

TIS E257 Elite TRMS AC/DC Digital Clampmeter with Amp Tip Jaws

TIS 438 1000Amp AC/DC TRMS Auto-Ranging Digital Clampmeter

TIS 438 1000Amp AC/DC TRMS Auto-Ranging Digital Clampmeter

Excellent customer service! I contacted them because one of my testers had developed a fault, and was out of warranty. Once the fault was explained and looked into TIS agreed to replace the tester free of charge, via my local electrical wholesaler. All done and dusted in less than a week - fantastic!
James Sealey
©2024 Test Instrument Solutions Limited, all rights reserved. Site by Edoru